Traffic Incidents related to Bruce Highway, Bemerside, QLD
8 Feb, 2012 - 2:00 PM
Cardwell Range Blasting (Bruce Hwy) a full closure of the Bruce Highway due to blasting on the Cardwell Range will be occurring on the 08 February 2012 at 2:00pm. Motorists can expect delays.
13 Dec, 2011 - 1:20 PM
Cardwell Range Blasting (Bruce Hwy)- A full closure of the Bruce Highway due to blasting on the Cardwell Range will be occurring on 13 December 2011 at 2:00pm. Motorists can expect delays of up to 15 minutes.
23 Nov, 2011 - 7:30 PM
Cardwell Range - Bruce Highway - A stationary vehicle is currently blocking the south bound lane on the northern side of the Range.
26 Mar, 2015 - 3:34 PM
Stationary Vehicle Northbound
At the top of the Cardwell Range.
Partial lane closures
No delays expected.
14 Oct, 2011 - 8:58 AM
Due to blasting on the Cardwell range on the 19 October 2011 there will be a full closure of the range between 2:00pm and 2:30pm. Traffic will be stopped at the bottom of the range whilst blasting occurs with delays expected.
6 Oct, 2011 - 12:48 PM
Due to a truck roll-over the Bruce Highway has been fully closed in both directions approximately 5 klms south of Cardwell. Police and emergency crews are on site. At this stage there is no estimated time the highway will be re-opened.
1 Sep, 2011 - 5:50 PM
Motorists are advised that the Cardwell Range in closed in both directions. Emergency Crews are on site so please be patient if travelling through the area.
18 Aug, 2011 - 4:17 PM
Motorists are advised of a single vehicle incident on the Bruce Highway, between Ingham and the Cardwell Range, near the Christies Road intersection. The northbound lane is currently blocked to traffic as emergency services work to remove the vehicle. Be aware that delays are expected and please approach the area with caution.
22 Jun, 2011 - 1:58 PM
CARDWELL RANGE - Full Closure of the Cardwell Range for blasting will be occurring on Friday 24 June 2011 at 2:00pm. Motorists should expect delays for approximately 15 minutes.
20 Apr, 2011 - 9:40 AM
Bruce Highway on the southern end of the Cardwell Range - Heavy Vehicle Roll-over. Maintenance crews are on site clearing the debris. Highway is opened to single lane escort. Motorists are advised to exercise extreme caution and patience when approaching the site.
19 Apr, 2011 - 3:44 PM
The Bruce Highway at Victoria Street Cardwell is closed due to gas leak. Motorists are advised to delay travel in this area for the next hour or so.
16 Mar, 2011 - 3:51 PM
See Description
The bridge at Blady Creek on the northern base of the Cardwell Range has been re-opened top single lane traffic. Updated 15:00 16/03/11
16 Mar, 2011 - 2:21 PM
See Description
Due to water over the bridge at Blady Creek on the northern base of the Cardwell Range, all through traffic will be held at Ingham Agencies in Ingham. Updated 14:00 16/03/11
2 Mar, 2011 - 6:28 PM
See Description
Bruce Highway at Seymour River and Arnot Ck. is open to all traffic. Updated 18:00 02/03/11
2 Mar, 2011 - 7:28 AM
See Description
Bruce Highway at Seymour River and Arnot Ck. is ropen to all traffic. Updated 07:00 02/03/11
1 Mar, 2011 - 3:45 PM
See Description
Bruce Highway at Seymour River and Arnot Ck. is remaining closed under police request. Forecast for re-opening is now early Wednesday. Updated 15:00 01/03/11
1 Mar, 2011 - 1:50 PM
See Description
Bruce Highway at Seymour River and Arnot Ck. is now opened to heavy vehicles only with water 250mm over the road. Water extends over 300-400m along the road length. The area will operate as one lane traffic under police control. Updated 14:00 01/03/11
28 Feb, 2011 - 9:23 PM
See Description
Bruce Highway at Seymour River and Arnot Ck. is closed with water >400mm over the road. Barricades are in place at Jones Road at the southern base of Cardwell Range. Updated 21:00 28/02/11
28 Feb, 2011 - 3:52 PM
See Description
Bruce Highway at Seymour River and Arnot Ck. Water rising and clsoure of bridges later this evening. Barricades and police closure being set-up at Jones Road at southern base of Cardwell Range. Local traffic only with all southbound traffic being held at Port Hinchinbrook in Cardwell. Updated 16:00 28/02/11
21 Feb, 2011 - 7:05 AM
See Description
Bruce Highway (Ingham-Tully)is open to all traffic. Motorists are cleared to travel through to Cairns with possible delays at Cardwell. Updated 07:00 21/02/11
6 Feb, 2011 - 2:10 PM
Bruce Highway (Ingham-Tully)is open to all traffic. Motorists are cleared to travel through to Cairns but are advised to exercise caution due to debris and possible pavement damage. Delays may expected at Cardwell. Updated 12:00 07/02/11
24 Dec, 2010 - 5:13 AM
Motorists are advised the Bruce Highway is closed to all vehicles at Seymour River, between Ingham and Cardwell.
23 Dec, 2010 - 11:26 PM
Motorists are advised the Bruce Highway is closed to all vehicles at Seymour River, between Ingham and Cardwell. Flood waters are currently 300mm over the road and rising.
3 Dec, 2010 - 10:04 AM
Motorists are advised of debris on the Bruce Hwy along the Cardwell Range. The road is opened to all vehicles and there is traffic control on site. There will be a road closure later on today to remove the remaining debris from the the road.
3 Dec, 2010 - 7:24 AM
On the Cardwell Range there has been a 2 vehicle crash. One land has been blocked and traffic can expect delays.
12 May, 2010 - 8:30 AM
Motorists are advised of a traffic incident on the Bruce Hwy, North of the Cardwell Range. Delays are expected and motorists are advised to avoid the area.
16 Apr, 2010 - 9:52 AM
16 Apr, 2010 - 9:23 AM
Motorists are advised of a traffic incident on the Bruce Highway at the Cardwell Range. The North Side of the Cardwell Range is blocked in both directions due to debris on the road. Please expect delays.
